Bath to Shower Conversion in Randburg

A couple in Fairland had a standard 1980s family bathroom — bath along one wall, toilet, basin, and not much else. The bath was original, starting to stain, and they only ever used the shower attachment. We removed the bath, waterproofed the area, installed a walk-in shower with a glass screen and modern tiling, and they gained almost a full metre of usable floor space. The bathroom went from feeling cramped to feeling generous.

That's the typical transformation. Most clients tell us they wish they'd done it years ago.

Bath-to-shower conversions are one of the most popular bathroom upgrades we do in Randburg. Here's why:

• Space — a bath takes up roughly 1.7m x 0.7m of floor space. A well-designed shower can use the same footprint but feel twice as large, especially with a frameless glass screen.
• Accessibility — stepping over a bath edge is awkward and risky, particularly for older family members. A flush or low-profile shower tray is safer and easier to use.
• Modern look — a tiled walk-in shower with a frameless screen looks clean and contemporary. It's one of the simplest ways to modernise a dated bathroom.
• Water saving — showers use less water than baths. A 5-minute shower uses about 40 litres versus 150+ litres for a bath.
• Property value — modern, well-finished bathrooms are a selling point. Buyers in Randburg respond well to walk-in showers.

A bath-to-shower conversion is more than just pulling out a bath and sticking in a shower. Here's what the job typically includes:

1. Assessment and planning — we measure the space, check the existing plumbing layout, discuss your preferences for tiles, screens and fixtures, and plan the conversion.
2. Bath removal — we disconnect the plumbing, remove the bath and any bath surround tiles, and clear the area.
3. Plumbing changes — the waste position usually needs adjusting (baths drain at one end, showers drain centrally or at a wall). We re-route hot and cold supply lines to suit the new mixer position.
4. Waterproofing — this is the most critical step. We apply a proper waterproofing membrane to the floor and walls before any tiling. Without this, water eventually seeps into the structure.
5. Tiling — floor and wall tiles are laid to create a finished, easy-to-clean surface. We can match existing bathroom tiles or create a feature design.
6. Shower installation — mixer valve, shower head (rainfall, handheld or both), drainage and a glass screen or door.
7. Finishing — grout, silicone sealing, and any accessories (niches, grab rails, soap holders).

The whole process typically takes 3-5 working days for a standard conversion.

In Fairland, we converted a main bathroom from a bath-shower combo to a walk-in shower with a linear drain and floor-to-ceiling tiles. The homeowner chose large-format grey tiles with a white grout line — clean and modern. The glass screen was frameless, which makes the bathroom feel bigger than it is.

A Northcliff project involved converting a small en-suite bath into an accessible shower for an elderly parent. We installed a low-profile shower tray, a fold-down seat, grab rails and a handheld shower head on a rail. Functionality was the priority, but it still looked great.

Every conversion is different. We work with your space, your style and your budget.

Bath-to-shower conversion costs in Randburg vary depending on several factors:

• Tile choice — from budget-friendly ceramics to premium porcelain or natural stone
• Shower screen — frameless glass costs more than framed, but looks more modern
• Plumbing complexity — if the waste needs significant re-routing, the plumbing takes longer
• Accessibility features — grab rails, fold-down seats and non-slip trays add to the cost but are worth it for safety
• Size of the area — a standard bath replacement is less work than extending the shower area beyond the original bath footprint

We provide a detailed, itemised quote before starting any work. No surprises.

A standard bath-to-shower conversion takes 3-5 working days. Here's a typical timeline:

• Day 1 — bath removal, plumbing rough-in, waterproofing preparation
• Day 2 — waterproofing membrane application (needs to cure overnight)
• Day 3-4 — floor and wall tiling, grout
• Day 5 — shower fitting, glass screen installation, silicone sealing, final clean

More complex conversions — larger areas, custom features, or difficult plumbing — may take a day or two longer. We'll give you an accurate timeline before we start.